Best Concrete Pumping in Auckland: Trusted Experts You Can Count On

Finding the best concrete pumping in Auckland comes down to matching the right pump to the pour, whether that means a boom reaching over a house for a slab or a line pump threading hose into a tight back section. The companies below cover boom, line, static and shotcrete pumping for driveways, footings, block fills, house slabs and multi-storey structures right across the region. Ian Howe Concrete Pumps and Pioneer Concrete Pumps run two of the largest fleets in the city, while smaller line pump specialists look after residential pours at short notice.

1Ian Howe Concrete Pumps

Ian Howe Concrete Pumps is a family owned pumping company operating from Whenuapai in West Auckland, where it has grown from a single trailer pump bought in 1990 into one of the largest fleets in the city. The business now runs boom, line, static and shotcrete equipment and offers a full pump and place service, so one call covers both the pour and the finishing. It suits builders and civil contractors who need reach, unusual configurations or high volume, and homeowners wanting a driveway or house slab placed cleanly.

Services

• Boom pump hire for large pours and elevated or high-rise placement
• Line pump hire for congested and tight-access residential sites
• Shotcrete pumping for tunnels, slopes and overhead stabilising work
• Dry hire of pumping equipment for crews with their own qualified operators
• Concrete placing and finishing, including exposed aggregate driveways, paths and pod floors

Highlights

• Trading since 1990 and now run across two generations of the Howe family
• Fleet of 15 boom pumps, 6 line pumps and 3 static high-rise pumps, plus tower booms, delta booms and spider crawler booms
• Key pumping contractor on the City Rail Link at Aotea and Mt Eden stations, including an 18 metre diesel electric spider crawler for the Aotea tunnels
• In-house workshop with its own team of mechanics maintaining the fleet
• Site Wise certified, with regular concrete pumping refresher courses for operators

Location & Contact

Name: Ian Howe Concrete Pumps
Address: 149 Fred Taylor Drive, Whenuapai, Auckland 0804
Phone: 09 416 0445
Website: ianhowe.co.nz

2Pioneer Concrete Pumps

Pioneer Concrete Pumps is a family business based at Wiri in South Auckland with more than 30 years in the industry. Its fleet covers everything from small residential line pumps through to placing booms, telescopic conveyors and the two largest mobile boom pumps in the country, and a dedicated high-rise team handles installation, technical support and dismantling on tower work. It is the strongest fit for apartment towers, bridge decks, mat pours and other jobs where reach or volume is the deciding factor.

Services

• Boom pump hire with over 20 pumps ranging from 16 metre to 52 metre reach
• Truck-mounted and trailer line pumps in 2 inch to 5 inch line sizes
• High-rise pumping using high-pressure static pumps and placing booms up to 36 metres
• Telebelt conveyor hire for mat pours, backfill, bridge decks and tilt-up panels
• Concrete pump sales

Highlights

• Operates two Putzmeister 52M boom pumps, the largest mobile concrete boom pumps in New Zealand
• The only line dragon remote-controlled hose handlers available in the North Island
• High-rise team has pumped Commercial Bay Tower, the Seascape and Sentinel buildings and the Sugartree apartments
• SiteWise Gold certified and prequalified under the Totika scheme

Location & Contact

Name: Pioneer Concrete Pumps Ltd
Address: 5 Balemi Way, Wiri, Auckland 2104
Phone: 09 277 7722
Website: concretepumps.co.nz

3Brewerton Concrete Pumps

Brewerton Concrete Pumps is a family owned operation run by Shannon and Deanna Brewerton from Whenuapai, pairing a 37 metre boom pump with a line pump for work across commercial, residential and civil sites. The owners are directly involved in day to day operations and every machine goes out with one of their own operators rather than on dry hire. Its certification stack, which includes rail electrification and bridge qualifications, makes it a practical choice for infrastructure and access-restricted work as well as house slabs.

Services

• Commercial concrete pumping for multi-storey and large-scale developments
• Residential pumping for house slabs, driveways and tight-access sites
• Infrastructure pumping for bridges, tunnels and civil projects
• Full package service covering pump, place, prep and concrete supply

Highlights

• Founded in 2021 by Shannon and Deanna Brewerton after a decade working in Auckland’s concrete industry
• Holds SiteWise Gold certification for 2025/2026 alongside Site Safe membership and PREQUAL assessment
• Operators hold KiwiRail Basic and Intermediate Electrification qualifications for work near overhead lines
• Drivers hold NZTA Bridge Engineering Self Supervision licences for heavy machinery on bridges
• No dry hire offered, so a trained operator comes with every machine

Location & Contact

Name: Brewerton Concrete Pumps Limited
Address: 80 Trig Road, Whenuapai, Auckland
Phone: 021 803 242
Website: brewertonconcretepumps.co.nz

4Pump Link

Pump Link is a North Shore based crew specialising in concrete line pumping, working across the wider Auckland region with its own truck, pump and hose hands. Alongside the pumping itself the team takes on the concrete work that goes with it, from driveways and slabs to footings and block fill. Published rates and a pre-pour site visit make it a straightforward option for homeowners and small builders who want to know the cost before the truck arrives.

Services

• Concrete line pumping across the North Shore and wider Auckland
• Concrete driveways
• Concrete slabs and floors
• Concrete footings
• Concrete block fill and retaining walls

Highlights

• Rates published on the website, split into travel and setup, an hourly rate and a charge per cubic metre pumped
• Staff visit the site before the pour to check access and discuss specifics
• Sponsors the Ōrewa Surf Life Saving Club and has contributed concrete work to its clubrooms

Location & Contact

Name: Pump Link
Address: North Shore, Auckland
Phone: 09 869 6047
Website: www.pumplink.co.nz

5MaxPump

MaxPump is a family run line pumping business working out of Kumeu and covering North, West and Central Auckland, with travel further afield for a small fee. It runs two S30 Jacon line pumps suited to domestic and light commercial pours, and can arrange layers and placers when a job needs them. The published zone pricing and two hour minimum make it easy to budget for smaller jobs such as a driveway, a set of footings or a block fill.

Services

• Line pumping for driveways, paths and patios
• House slab and footing pours
• Block filling for retaining and cavity walls
• Post and pile hole filling
• Arranging qualified concrete layers and placers

Highlights

• Established in 2012 and still owner operated
• Two S30 Jacon line pumps handling aggregate up to 13mm through 100 metres of hose
• Zone based pricing published on the website, including a minimum on-site flat rate
• Block fill and post hole calculators on the site for working out concrete volumes before booking
• Open Saturday mornings as well as weekdays

Location & Contact

Name: MaxPump Ltd
Address: 40a Main Road, Kumeu, Auckland 0810
Phone: 022 639 9558
Website: maxpump.co.nz

Concrete Pumping in Auckland at a Glance

How to Choose the Right Concrete Pumping Company in Auckland

• Work out the distance from where the truck can park to the furthest point of the pour, since that decides whether you need a boom, a line pump or extra hose
• Check the site for overhead power lines, narrow driveways and soft ground, and tell the pump company before the day rather than on arrival
• Ask how charges are structured, as most operators price travel and setup, an hourly rate with a minimum, and a rate per cubic metre separately
• Confirm whether the company supplies operators with the machine or offers dry hire only, and whether it can also place and finish the concrete
• Look for current safety prequalification such as SiteWise or Site Safe, which most commercial sites will ask for before letting a pump on

Frequently Asked Questions About Auckland Concrete Pumping

What does concrete pumping cost in Auckland?

Operators that publish their rates split the job into three parts: a travel and setup fee, an hourly rate with a minimum charge of around two hours, and a rate for each cubic metre pumped. Extra hose beyond the standard run, usually 50 metres, is charged per metre on top. Prices are normally quoted exclusive of GST, so ask which figure you are being given.

What is the difference between a boom pump and a line pump?

A boom pump is truck mounted with a folding arm that swings the delivery line over obstacles, which suits large slabs, multi-storey work and sites where the concrete truck cannot get close. A line pump feeds concrete through hose laid along the ground, which is slower but far easier to get into tight sections, under low branches or around overhead lines. Most Auckland residential jobs use a line pump.

How much boom reach do I need?

Reach is measured from where the pump can safely set up to the furthest point of the pour, not from the boundary, and it has to clear anything in between. Pump companies size the machine from that distance plus the setup space available, so give them the access details and a rough site sketch when you book. Auckland fleets run booms from about 16 metres up to 52 metres.

Do I need a pump for a residential driveway?

Not always, but a pump saves a lot of barrowing when the truck cannot back up to the pour, when the ground is soft, or when the concrete has to travel past a house. It also keeps the pour continuous, which avoids cold joints and gives a more consistent finish. For most suburban driveways a line pump is enough.

How far ahead should I book a concrete pump?

Around five to seven days is a reasonable lead time for a standard residential or small commercial pour, and two to four weeks is better for larger commercial and infrastructure jobs. Operators will often fit in urgent work if a machine is free. Booking with the concrete supplier and the pump company for the same window matters, since the pump is charged by the hour once it is on site.

Is it safe to pump concrete near overhead power lines?

Overhead lines are one of the most serious hazards in pumping work and legal minimum approach distances apply to both booms and hose handling. The pump operator will assess the site and may refuse to set up until the lines are isolated or the machine can be positioned clear of them. WorkSafe New Zealand publishes guidance on working safely around electricity at worksafe.govt.nz.

Do I need building consent for a concrete slab?

A slab that forms part of a building, such as a house floor or a garage, is normally consented as part of the wider building work, while a plain driveway or path usually is not. Rules vary with what sits on the slab and how close it is to boundaries or services. The Ministry of Business, Innovation and Employment sets out what needs consent at building.govt.nz, and Auckland Council can confirm for a specific site.

Who supplies the concrete, the pump company or me?

In most cases you or your builder order the ready mix from a concrete plant and the pump company only pumps it, so the two bookings need to line up. Some Auckland operators also offer a full package that covers supply, pumping, placing and site prep under one arrangement. Ask when you book, because coordinating the two yourself can leave the pump idle and charging while it waits for trucks.